News

Versatile GaN MMIC Low Noise Amplifiers Have Output IP3 of +32 dBm and High Input Power Handling of 5 Watts

Posted on Tuesday, March 06, 2018
Versatile GaN MMIC Low Noise Amplifiers Have Output IP3 of +32 dBm and High Input Power Handling of 5 Watts

The CMD276C4, CMD277C4 and CMD278C4 GaN MMIC LNAs deliver high linearity performance with output IP3 of +32dBm while offering high input power handling of 5W. The high input power handling feature enables system designers to avoid limiters and other protection networks, while still achieving extremely low noise figure over the operating bandwidth. These new MMIC LNAs are housed in a leadless 4x4 mm QFN package. They are ideally suited for radar and electronic warfare (EW) applications where high performance and high input power survivability are required.

The CMD276C4 is a 2.6 to 4 GHz (S Band) LNA delivering greater than 14 dB of gain with a corresponding output 1 dB compression point of +25.5 dBm and a noise figure of 1.2 dB.

The CMD277C4 is a 5 to 7 GHz (C Band) LNA with 20 dB of gain, output 1 dB compression point of +26.5 dBm and a noise figure of 1.2 dB.

The CMD278C4 is a broadband 8-12 GHz (X Band) LNA with 15 dB of gain,output 1 dB compression point of +28 dBm and a noise figure of 1.8 dB.  

 

Visit https://www.custommmic.com/low-noise-amplifiers/  for more information or to download full datasheets and S-parameter data. Evaluation boards are also available.

Custom MMIC

300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294

Terms and Conditions

©2006-2017 Custom MMIC
All rights reserved.

Get our News:

GET OUR NEWS


Raytheon Supplier Excellence Award 2016,2017
Custom MMIC

300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294

Terms and Conditions

©2006-2018 Custom MMIC
All rights reserved.