News

Get Our News
New Products
We are excited to launch a new product line of GaAs Digital Step Attenuators (DSA). The DSA family is intended to ease the design of high dynamic range receivers and instrumentation. These applications often must accomplish gain control of 50dB or more. Fine step DSAs (e.g., 0.5dB Least Significant Bit [LSB]) are often used for these applications. However, when a large attenuation change is needed, [...] Read More
New Products
We're proud to announce that we've recently released a new GaAs Low Noise Amplifier (LNA) MMIC with broadband noise figure performance previously only achievable with discrete FET designs. The CMD283C3, with 0.6dB noise figure, is the first in a family of new Ultra Low Noise Amplifiers. The CMD283C3 LNA covers 2-6 GHz with high midband gain of 27 dB and output P1dB of 16dBm. The MMIC is [...] Read More
New Products
We are excited to announce that we are continuing to add to our extensive LNA and Phase Shifter MMIC portfolio with the CMD270P3 and CMD174. The CMD270P3 is a C Band, 4-8 GHz low noise amplifier housed in a leadless 3x3 mm plastic surface mount package. The LNA delivers greater than 16 dB of gain with a corresponding output 1 dB compression point of +18 dBm and a noise figure of 1.7 dB. The CMD270P3 [...] Read More
New Products
Custom MMIC continues to rapidly add to its extensive family of MMIC Switches; with two new GaAs MMIC switches, the non-reflective CMD235C4 and CMD236C4. The CMD235C4 is a DC-18 GHz broadband MMIC SP5T switch offering broadband performance with an insertion loss of 2.5dB and high port-to-port isolation of 40dB at 10 GHz. The CMD236C4 covers DC to 18 GHz and offers a low insertion loss of 2.5 [...] Read More
New Products
The CMD276C4, CMD277C4 and CMD278C4 GaN MMIC LNAs deliver high linearity performance with output IP3 of +32dBm while offering high input power handling of 5W. The high input power handling feature enables system designers to avoid limiters and other protection networks, while still achieving extremely low noise figure over the operating bandwidth. These new MMIC LNAs are housed in a leadless 4x4 mm [...] Read More
New Products
We are pleased to announce that we have added two new GaAs High IP3 I/Q Mixer MMICs to our product family covering C and X-Band, the CMD257C4 and CMD258C4. These new mixers feature wide IF bandwidths and excellent image rejection, extremely compact 4x4 SMT packages and offer cost savings compared to hybrid image reject mixers and single sideband upconverter assemblies.   The CMD257C4 offers [...] Read More
New Products
We have announced three new GaAs MMIC mixers for C-band, X-band, K-band, and Ka-band applications. The CMD251C3 fundamental mixer, CMD252C4 I/Q mixer, and CMD180 fundamental mixer deliver best-in-class isolation and conversion loss performance while offering low input power requirements. These new MMIC mixers help increase dynamic range while reducing LO power and subsequent filtering requirements. [...] Read More
New Products
We are pleased to announce the addition of the CMD241P4, a packaged version of our popular CMD241 ultra-wideband GaAs MMIC distributed low noise amplifier. The wideband operation, low noise figure, low current consumption, excellent return loss, and compact size of this distributed amplifier device make it ideal in use in L-, S-, C-, X-, Ku-, and K-band wideband radar, broadband microwave/millimeter [...] Read More
New Products
We have announced a new edition to our growing line of high performance MMIC doublers, the CMD226N3 broadband frequency doubler. The doubler covers an input frequency of 7 GHz to 11 GHz input frequency (C-,X, input ;Ku-, and K-band output). This doubler’s low conversion loss and excellent Fo isolation make it ideal for use in military radar, SMDS, SATCOM, VSAT, and LO chains for point-to-point [...] Read More
New Products
We have added a new packaged distributed amplifier, CMD201P5, to our growing portfolio of Broad Range Distributed Amplifier MMICs. Beyond ultra-wideband performance of DC to 20 GHz, this new distributed power amplifier also features high linearity with high output power and very low return loss. The CMD201P5 distributed power amplifier provides 11 dB of gain with an output 1 dB compression [...] Read More
New Products
We've added two new low loss, high linearity and high isolation MMIC mixers to our growing family of fundamental, IQ, and IRM mixers. The CMD181 and CMD261 are both general purpose double balanced mixers that can be used for upconversion and downconversion, or as image rejection mixers or single sideband modulators with the appropriate external hybrids and power splitters. The CMD181 fundamental [...] Read More
New Products
We've added two unique distributed amplifiers to their performance leading standard product line. We continue our focus on offering value-added MMIC solutions for aerospace, commercial and military applications. The CMD242 distributed amplifier features ultra-wideband performance from DC to 40 GHz while delivering 10.5 dB of gain with a flatness of +/- 1 dB. The noise figure of the CMD242 [...] Read More
New Products
We've added a new category to our rapidly expanding standard product offerings. Our new GaAs MMIC Low Phase Noise Amplifier (LPNA) family offers previously unattained phase noise performance. Phase noise is a critical requirement which defines the performance level of most radars and communications systems. The five product family achieves phase noise performance as low as -165dBc/Hz at 10 [...] Read More
New Products
We've added a new distributed amplifier to our market leading portfolio of Broad Range Distributed Amplifiers.   The ultrawideband DC-22 GHz performance of the CMD240P4 distributed amplifier is accompanied with a low noise figure of 2.2 dB and +28 dBm IP3. The performance levels of this device make it suited for an extremely wide range of applications, including electronic warfare, [...] Read More
New Products
We've added two new GaAs MMIC switches to our expanding product offerings, the non-reflective CMD234C4 and CMD235C4.  The CMD234C4 is a DC-18 GHz broadband MMIC SP3T switch featuring a low insertion loss of 2.4 dB and a high isolation of 40dB at 10 GHz. The CMD235C4 is a DC-18 GHz broadband MMIC SP5T switch offering broadband performance with an insertion loss of 2.5dB and high port-to-port [...] Read More
New Products
We've added a new amplifier to our Broad Range Distributed Amplifier portfolio, the CMD233C4. The 2-18 GHz distributed amplifier is a packaged version of the CMD233 die product.  The CMD233C4 is a wideband GaAs MMIC distributed amplifier with a low noise figure of 4.5 dB and output 1 dB compression point of +20.5 dBm. This amplifier delivers over 9 dB of gain and operates from a single [...] Read More
New Products
We've has added two new packaged driver amplifiers to our expanding product offerings, the CMD232C3 and the CMD231C3.   2-9 GHz Driver Amplifier with 15 dB of Gain The newly released CMD232C3 GaAs MMIC driver amplifier functions from to 2-9 GHz and delivers over 15 dB of temperature stable gain with an output 1 dB compression point of 17 dBm, and an output IP3 of 23 dBm. With this device’s [...] Read More
New Products
We've added CMD238 2-20 GHz amplifier to our market leading Broad Range Distributed Amplifier portfolio. The CMD238 is a wideband GaAs MMIC distributed amplifier ideally designed for wideband applications requiring high linearity in a small die size. From 2 to 20 GHz, this amplifier delivers 14dB of gain with an output P1dB of +26 dBm, an output IP3 of +34 dBm, and a 2nd harmonic level of -33 [...] Read More
New Products
We've added a new amplifier to our expanding product offerings, the CMD243 26-35 GHz low noise driver amplifier. The CMD243 is a wideband self-biasing GaAs MMIC balanced driver amplifier that offers 15.5 dB of gain with an output P1dB compression point of +21 dBm. The amplifier operates from a single 5 volt supply and draws just 90 mA typical. The balanced design provides good VSWR matching, [...] Read More
New Products
We've added two new Broad Range Distributed Amplifiers to our portfolio, the DC-22 GHz CMD240 and 2-22 GHz CMD241. Both new products feature a unique positive gain slope, which eases the design of broadband systems by eliminating equalizer circuits or added amplifiers to compensate for the typical negative gain slope of most amplifiers. The CMD240 is an ultra-wideband GaAs MMIC [...] Read More
New Products
We've announced the addition of a new driver amplifier to our growing line of products, the CMD232 2-9 GHz Driver Amplifier. The CMD232 is a wideband GaAs MMIC driver amplifier that offers high gain, wide bandwidth, single positive supply voltage, and a small die size. It is ideally suited for military, space, and communications systems that require small size and high linearity. At 6 GHz the [...] Read More
New Products
We've added a new amplifier to our expanding product offerings, the CMD231 2-6 GHz Driver Amplifier.  The CMD231 is a wideband GaAs MMIC driver amplifier that offers high gain, single positive supply voltage, low current consumption, and small die size. It is ideally suited for communications systems needing small size and high linearity. The device operates from a +3 to +6 V supply. [...] Read More
New Products
We've added another new amplifier to our growing product line, the CMD233 2-20 GHz Distributed Low Noise Amplifier.   The CMD233 is a GaAs MMIC distributed low noise amplifier that offers wide bandwidth, single positive supply voltage, low noise figure, and small die size. It is ideally suited for military, space, and communications systems that need a small size and low noise [...] Read More
New Products
DC- 26 GHz SPDT MMIC Switch Offers Low Insertion Loss and High Isolation Custom MMIC has added a new SPDT switch to their rapidly growing standard product portfolio - the CMD230. Its 1.4 dB insertion loss is the company’s lowest yet for an SPDT.  The CMD230 is a general-purpose, broadband, high-isolation reflective MMIC SPDT switch in die form. Covering DC to 26 GHz, it features low insertion [...] Read More
New Products
The CMD223 balanced low-noise amplifier (LNA) is perfect for EW and communication systems where small size and low power consumption are critical. This 9-18 GHz features a low noise figure, high-gain, broadband performance, excellent return losses, and single positive supply voltage. At 13.5 GHz the CMD223 delivers greater than 22 dB of gain with a corresponding output 1 dB compression [...] Read More
New Products
The CMD219C4 is a broadband MMIC low-noise amplifier (LNA) fabricated in GaN technology that operates from 4 to 8 GHz with a gain of 22.5 dB, a noise figure of 1.0 dB, and an output 1 dB compression point of +17 dBm. In terms of survivability, the CMD219C4 can withstand RF input power levels of up to 5 Watts without permanent damage. The CMD219C4 is housed in a leadless 4x4 mm ceramic package. The [...] Read More
New Products
The CMD189P3 is a broadband MMIC low-noise amplifier (LNA) that operates from 10 to 14 GHz and delivers greater than 19 dB of gain with a corresponding output 1 dB compression point of +4 dBm and noise figure of  1.4 dB. It is housed in a leadless 3x3 mm plastic surface-mount package and has a 50 ohm matched design, which eliminates the need for external DC blocks and RF port matching. The [...] Read More
New Products
The CMD177C3 is a packaged 6 to 14 GHz double-balanced mixer with a low conversion loss of 6.5 dB, high LO to RF isolation of 45 dBc, and a high input IP3 of +18 dBm across the 6 to 14 GHz bandwidth. The minimum LO drive requirement is +9 dBm, with saturation reached at levels above +13 dBm.  Housed in a leadless, 3 mm ceramic surface mount package, the CMD177C3 can be used in both up- and [...] Read More
New Products
The CMD214 is a new 24 to 36 GHz (output) active x2 frequency multiplier in die form. The CMD214 accepts input signals in the range of 12 to 18 GHz and provides output to the second harmonic (24 to 36 GHz) at a level of +17 dBm. Isolations to the fundamental and third harmonics are greater than 32 dBc and 25 dBc, respectively. Typical input drive level for the CMD214 is +14 dBm, although the multiplier [...] Read More
New Products
The CMD163 is a 17 to 27 GHz low noise amplifier (LNA) in die form. The CMD163 has a gain of +24 dB, a noise figure of less than 1.3 dB, and an output 1 dB compression point of +19 dBm across the 17 to 27 GHz bandwidth. Additionally, the CMD163 utilizes an all-positive bias scheme, thereby eliminating the need for negative voltages and expensive sequencing circuitry. Bias conditions are Vdd [...] Read More
New Products
Custom MMIC Introduces New 4-8 GHz GaN Low-Noise Amplifier – Custom MMIC is pleased to announce the release of the CMD219, a 4-8 GHz low noise amplifier (LNA) in die form, to their growing line of standard GaN amplifier products. The CMD219 has a gain of 23 dB, an output of 1 dB compression point of +18 dBm, and a noise figure of 1.1 dB across its operating bandwidth. Typical [...] Read More
New Products
The CMD218 offers a gain of 22 dB, output of 1 dB, compression point of +19.5 dBm, and noise figure of less than 1.25 dB across the 5 to 9 GHz frequency range. In addition, without an input limiter, the CMD218 can survive high incident power levels up to 5 W with no degradation in performance.   The CMD218 is a 50 ohm matched design, thus eliminating the need for external DC blocks and RF port [...] Read More
New Products
The CMD203 is a DC-20 GHz SP4T non-reflective switch in die form. Featuring low insertion loss of 2.4 dB and high isolation of 39 dB at 10 GHz, the CMD203 offers exceptional switch performance over a broad frequency range, with a switching speed of 66 nS, an input P1dB of +20 dBm, and an input IP3 of +30 dBm. The CMD203 also includes an on-board binary decoder circuit, thereby reducing the [...] Read More
New Products
The CMD196 is a DC-28 GHz, non-reflective, SPDT switch in die form. Covering DC to 28 GHz, the CMD196 features low insertion loss of 1.75 dB, high isolation of 46 dB, and port return losses better than -15 dB at 14 GHz. A pair of complimentary voltage lines at 0 / -5 V control the switching action without the need for an external bias supply. Switching speed is typically 1.8 nS. The CMD196 [...] Read More
New Products
The CMD195 is a new DC-20 GHz non-reflective SPDT MMIC switch which operates across the DC to 20 GHz bandwidth with an insertion loss of 2.5 dB that reduces to 2 dB as the frequency increases. The terminated switch has an isolation of greater than 40 dB, port return losses less than -15 dB, an input 1 dB compression point of +25 dBm, and a switching speed of 1.8 nS. Switching operation is controlled [...] Read More
New Products
The CMD158C4 is a new 6 to 16 GHz driver amplifier which delivers 21 dB of gain across its bandwidth, while providing +21 dBm of saturated output power at a PAE of 24%. The CM158C4 operates from a single positive supply voltage of +5.0 V @ 95 mA. The amplifier is housed in a Pb-free, RoHs-compliant, ceramic 4x4 mm QFN surface-mount package. No external components are required for operation [...] Read More
New Products
The CMD217 is a new 28 to 32 GHz GaN power amplifier in die form which features greater than 20 dB of gain across its operating frequency range, with a corresponding output 1 dB compression point of +36.7 dBm and saturated output power of +39.3 dBm (8.5 W). Power added efficiency for the CMD217 is 28% to 35% across the band. The CMD217 is a fully matched 50 ohm design and only requires external [...] Read More
New Products
The CMD216 is a new 14-18 GHz GaN power amplifier in die form which delivers 16 dB of flat gain across the entire 14 to 18 GHz bandwidth, an output 1 dB compression point of +37 dBm, and a saturated output power of +38 dBm. The CMD216 requires a bias of Vdd = 28 V, 550 mA, and Vgg = -3.4 V. Additionally, the amplifier boasts a power added efficiency of 32% or greater.   The CMD216 is a [...] Read More
New Products
The CMD207 is a new 20-40 GHz MMIC driver amplifier in die form with an all positive bias scheme which delivers 25 to 30 dB of gain, has an output 1 dB compression point of +18.5 dBm, a saturated output power of +21 dBm, and a noise figure of 5 to 6 dB across the entire 20 to 40 GHz bandwidth. The amplifier utilizes an all-positive bias scheme of 4.0 V, 270 mA on the drain, and 3 V, 3 mA on the [...] Read More
New Products
The CMD206 is a new DC-50 GHz distributed low noise amplifier in die form which features DC to 50 GHz operation with a noise figure of less than 3.5 dB, a gain of greater than 11 dB, and an output 1 dB compression point of +12 dBm at 30 GHz. The amplifier requires an all-positive bias of only 4 V @ 32 mA (drain), 3 V (gate). An external drain bias network and input blocking capacitor are required [...] Read More
New Products
The CMD204C3 is a DC to 20 GHz single-pole, single-throw (SPST) MMIC switch. It's also available in die form (CMD204). The CMD204C3 SPST, at 10 GHz, features a low insertion loss of less than 1 dB, a high-isolation of 50 dB, and a 0.1 dB compression point of +25 dBm. At 20 GHz, the insertion loss is 1.2 dB, the isolation is 40 dB, and the 0.1 dB compression point is +24 dBm. The CMD204C3 is [...] Read More
New Products
The CMD184 amplifier die offers an ultra-wide bandwidth of 0.5 to 20 GHz, an output 1 dB compression point of greater than +34 dBm, and flat gain of 13 dB. The CMD184 is Custom MMIC’s first released standard product fabricated on GaN. The CMD184 requires an off-chip bias tee for proper operation. The die offers full passivation for increased reliability and moisture protection. Ideal applications [...] Read More
New Products
The CMD203C4 is a DC to 20 GHz single-pole, four-throw (SP4T) MMIC switch housed in a leadless 4 x 4 mm ceramic package. The CMD203C4 is the latest control device added by Custom MMIC to its growing library of standard products. The CMD203C4 features a low insertion loss of 2.4 dB and high isolation of 40 dB at 10 GHz. The switch also includes an integrated binary decoder circuit that only [...] Read More
New Products
The CMD179 is a general purpose, double-balanced GaAs mixer that can be used for up- and down-converting applications between 16 and 26 GHz. The mixer, which offers conversion loss of 7 dB, an LO to RF isolation of greater than 40 dB, an IF bandwidth of 8 GHz, and an input IP3 of +18 dBm, is ideally suited for hybrid assemblies given its small die size of 0.9 mm^2. A key advantage of the CMD179 [...] Read More
New Products
The CMD201 is a new DC-20 GHz distributed MMIC power amplifier in die form which delivers greater than 20 dB of gain from DC to 20 GHz, with a corresponding output 1 dB compression point of +29 dBm and an output IP3 of +38 dBm at 10 GHz. This new distributed power amplifier offers ultra-wideband performance, high linearity, high output power, excellent return losses, and a small die size. An off-chip [...] Read More
New Products
The CMD192C5 is the plastic packaged (QFN) version of the highly popular CMD192 amplifier that until now had only been available in die form. The CMD192C5 is a wideband GaAs MMIC distributed amplifier that operates from DC to 20 GHz and has a positive gain slope versus frequency. This design feature allows for the cascading of multiple amplifiers without the need for extra gain compensation circuitry. [...] Read More
New Products
The CMD197 offers 16 dB of flat gain with a corresponding output 1 dB compression point of greater than +20 dBm and an output IP3 of greater than +30 dBm across its entire bandwidth. The driver amplifier also includes a number of features including a single positive bias requirement, an on-chip bias choke, 50 Ohm port matches, wide bandwidth, and high linearity. Full passivation of the die ensures [...] Read More
New Products
Custom MMIC Adds Two Non-Reflective Switches to Expanding Product Line – Custom MMIC is introducing two new DC-18 GHz SPDT non-reflective switches, the CMD195C3 and the CMD196C3. While both switches cover the same bandwidth and are housed in the same 3x3 mm RoHS-compliant SMT package, they differ in their insertion loss. The CMD195C3 has an insertion loss of 2.25 dB at the low end [...] Read More
New Products
The CMD167 and the CMD167P3 both are ideally suited for EW and communications systems where small size and low power consumption are needed. The CMD167 die is a highly efficient, ultra low noise GaAs MMIC amplifier that operates from 10 to 17 GHz. The CMD167P3 is the packaged version of the amplifier which operates from 8 to 16 GHz. At 14 GHz, both the CMD167 and the CMD167P3 deliver greater than [...] Read More
New Products
The CMD192 is a wideband DC-20 GHz GaAs MMIC distributed amplifier available in die form. This amplifier delivers greater than 20 dB of gain with a corresponding output 1 dB compression point of + 22 dBm and a noise figure of 2.8 dB at 18 GHz. Unlike most distributed amplifiers, the CMD192 has a positive gain slope with increasing frequency, thus compensating for the higher frequency losses typical [...] Read More
New Products
The CMD194C3 is a packaged broadband amplifier offering low noise figure and high gain while requiring a single-supply voltage. The CMD194C3 operates from 6-20 GHz and delivers greater than 20 dB of gain with a corresponding output 1 dB compression point of +15 dBm and a noise figure of 2 dB. The device is housed in a leadless, Pb-free, and RoHs compliant 3x3 mm ceramic surface-mount package. [...] Read More
New Products
The CMD173P4 is a GaAs MMIC distributed amplifier operating from DC to 20 GHz that delivers greater than 15 dB of gain with a corresponding output of 1 dB compression point of +18 dBm and noise figure of 2 dB at 10 GHz. Housed in a leadless 4 x 4 mm plastic surface mount package, the CMD173P4 also utilizes an on-chip pinch off tracking circuit to ensure consistent performance over temperature and process [...] Read More
New Products
The CMD191C4 is a GaAs MMIC driver amplifier housed in a leadless, RoHs compliant, 4x4 mm surface mount package. It offers high output power and low current consumption. Ideally suited for complex communications systems where small size and high linearity are needed, the device operates from 4 - 10 GHz and delivers 20 dB of gain with a corresponding output 1 dB compression point of greater than [...] Read More
New Products
The CMD190 is a highly efficient GaAs MMIC ultra low noise amplifier (LNA) MMIC for applications from 33 to 45 GHz. This amplifier delivers greater than 19 dB of gain with a corresponding noise figure of 2.1 dB at 36 GHz. The CMD190 is an all-positive bias design, thus eliminating the complicated and costly negative bias sequencing circuits while also simplifying board layout. In addition, the [...] Read More
New Products
The CMD187 is a wideband GaAs MMIC amplifier die for applications from 2 to 20 GHz. This device delivers greater than 22 dB of flat gain with a corresponding output 1 dB compression point of +14 dBm, and a noise figure of 4.5 dB at 20 GHz. The CMD187 is an all-positive bias design, thus eliminating the complicated and costly sequencing circuits while also simplifying board layout. In addition, the [...] Read More
New Products
The CMD186P3 presents an ultra-low noise figure of 2.1 dB, delivers greater than 18 dB of gain, and has a corresponding output 1 dB compression point of +16.5 dBm. The CMD186P3, which is housed in a RoHS-compliant, 3x3 mm QFN plastic surface mount package, requires a single supply voltage of +5 V at 78 mA. Ideal of microwave radios and C- and X-band applications where small size and low power consumption [...] Read More
New Products
The CMD185P3 has a low noise figure of 1.9 dB and associated gain of +15 dB across a 4 to 8 GHz bandwidth, while only requiring a single positive supply voltage (+4.0 V @ 75 mA). With an output 1dB compression point at +15 dBm, the CMD185P3 is ideal for converter chains in communications systems where small size and low DC power consumption are required. The CMD185P3 is housed in a Pb-free, [...] Read More
New Products
Custom MMIC Adds Four New Products to Its Growing Line of Amplifiers – Custom MMIC has added four new amplifiers in die form to its product family: the CMD164, 165, and 173 distributed amplifiers, and the CMD166 driver amplifier. The new products boast ultra-wideband performance, low noise figure, low current consumption, and an all positive bias scheme. Concerning the distributed amplifiers, [...] Read More
New Products
Operating between 11 and 21 GHz, the CMD178C3 offers 6 dB conversion loss, with very low LO leakage to both the RF and IF ports (-25 dBm and -30 dBm respectively). It can operate with an LO drive level as low as +9 dBm, and has a wide IF bandwidth from DC to 6 GHz. The CMD178C3 can easily be configured as an image reject mixer or single sideband modulator with external hybrids and power splitters. [...] Read More
New Products
The CMD158P3 is a broadband driver amplifier ideally suited for mixer LO chains, passive multipliers, and medium power applications. It covers 6 to 14 GHz and delivers 20 dB of gain with +20 dBm of saturated power while requiring a single +5 V supply @ 95 mA. Housed in a RoHs-compliant, Pb-free 3x3 mm QFN plastic package, the CMD158P3 offers high performance in a small footprint. The input [...] Read More
New Products
The CMD172 is a Voltage-Variable Attenuator (VVA) in die form operating from 18 to 40 GHz. Fabricated in GaAs with a small footprint, the CMD172 is a wideband absorptive VVA die that uses a single DC control voltage between -3V and 0V to vary the RF signal level over a 37 dB dynamic range. The insertion loss of the CMD172 is only 1.6 dB. The GaAs MMIC also offers full passivation for increased [...] Read More
New Products
This 6-10 GHz I/Q Mixer from Custom MMIC offers Low Conversion Loss and High Image Rejection. When paired with an external IF hybrid, the CMD182C4 can be used as either an image reject mixer or single sideband modulator, with 5.5 dB of conversion loss and 30 dB of image rejection/sideband suppression, while supporting an IF bandwidth of DC to 3.5 GHz. In addition, the CMD182C4 features very low LO [...] Read More
New Products
The CMD132P3 offers an ultra-low noise figure of 1.3 dB, delivers greater than 20 dB of gain across the entire bandwidth, and has a corresponding output 1 dB compression point of +10 dBm. The CMD132P3, which is housed in a RoHS-compliant, 3x3 mm QFN plastic surface mount package, requires a single supply voltage of +3.6 V at 30 mA. Ideal for microwave radios and C- and X-band applications where [...] Read More
New Products
Custom MMIC has added three new GaAs MMIC power amplifiers covering 5 to 11 GHz to our growing standard product library. The CMD169P4 (5 – 7 GHz), CMD170P4 (7.5 – 9 GHz) and CMD171P4 (9.5 – 11 GHz) each have an output 1 dB compression point of greater than +28 dBm, with gain levels from 20 to 30 dB. All three designs require only positive bias, thereby eliminating the need for [...] Read More
New Products
The CMD173 is a wideband GaAs MMIC distributed amplifier die for applications from DC to 20 GHz. This device delivers greater than 15 dB of gain with a corresponding output 1 dB compression point of +18 dBm, and a noise figure of 1.5 dB at 8 GHz. The CMD173 is an all-positive bias design, thus eliminating complicated and costly sequencing circuits while also simplifying board layout. In addition, the [...] Read More
New Products
The CMD157 (die) and CMD157P3 (packaged) are GaAs MMIC low-noise amplifiers (LNAs) for applications from 6 to 18 GHz. These broadband devices each boast an impressively low noise figure of 1.5 dB, deliver greater than 25 dB of flat gain, and have a corresponding output 1 dB compression point of +10 dBm. Both the CMD157 and the CMD157P3 are 50 Ohm matched designs, thus eliminating the need for external [...] Read More
New Products
The CMD162 is a GaAs MMIC low-noise amplifier (LNA) chip for applications from 26 to 34 GHz. Optimized for 30 GHz satellite communications, the CMD162 boasts a typical noise figure of 1.7 dB with a small-signal gain of 22 dB and an output 1 dB compression point of +7 dB. This amplifier delivers high performance with high efficiency, reducing typical industry DC power dissipation for a device in this [...] Read More

Custom MMIC

300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294

Terms and Conditions

©2006-2017 Custom MMIC
All rights reserved.

Get our News:

GET OUR NEWS


Raytheon Supplier Excellence Award 2016,2017
Custom MMIC

300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294

Terms and Conditions

©2006-2018 Custom MMIC
All rights reserved.