News

Announcing our Breakthrough GaAs and GaN MMICs

Posted on Saturday, June 09, 2018
Announcing our Breakthrough GaAs and GaN MMICs

We are proud to announce our industry-first Ultra Low Noise Amplifier (ULNA) MMIC. The CMD283C3 provides an incredible 0.6 dB noise figure, outperforming all other LNA MMICs, and rivaling discrete component implementations. It operates over a frequency range of 2 GHz to 6 GHz (S & C-band) and has output IP3 of +26 dBm.

Four members of our new GaAs MMIC digital attenuator family are also being introduced. The CMD279 and CMD280 operate up to 30 GHz with 5-bit control. Attenuation range is up to 15.5 dB. Two, 2-bit attenuators, the DC-35 GHz CMD281 and DC-40 GHz CMD282, offer coarser control in 2 and 4 dB steps respectively. All four devices offer input IP3 of +42 dBm.

Our latest Distributed Amplifier, the DC-20 GHz CMD249P5, offers a positive gain slope with nominal 12 dB gain. The GaAs device features output Psat of +30 dBm and output IP3 of +38 dBm.

We also continue to enhance our line of unique low phase noise amplifiers (LPNAs). Responding to customer requests to assist in reducing unwanted phase noise and improve signal integrity and target acquisition in military radar systems, these LPNAs operate up to 40 GHz and offer low phase noise performance down to -165 dBc/Hz at 10 kHz offset. They serve as Local Oscillator (LO) drivers or receiver amplifiers in a variety of phased array radar, EW, military radio, instrumentation, and aerospace and space communication designs.

MMIC releases on our horizon include more ultra-low noise amplifiers and digital attenuators, as well as broadband distributed power amplifiers and GaN mixers.

Custom MMIC

300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294

Terms and Conditions

©2006-2017 Custom MMIC
All rights reserved.

Get our News:

Get our News

Custom MMIC

300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294

Terms and Conditions

©2006-2018 Custom MMIC
All rights reserved.