Distributed Amplifier MMICs
Our Broadband Distributed Amplifier MMICs are the Only Choice for Wideband RF / Microwave Designs
In broad range applications where high dynamic range across broad bandwidths is required, Custom MMIC's Broadband Distributed Amplifiers excel at and exceed expectations of quality and reliability. Several of these Distributed MMIC Amplifiers offer positive gain slope and a single positive voltage which eliminates the need for large, complex, and costly biasing and matching circuitry. Additional features include: DC-50 GHz (from UHF up through X and K, and into V band) coverage, 50 ohm matched design, and high dynamic range.
Eliminating the need for DC Blocks and RF port matching, some of Custom MMICs Broadband Distributed Amplifiers are designed with internal 50 Ohm matching circuitry. Offering another layer of bill-of-material (BOM), cost, and footprint reduction, many of these Distributed Amplifier MMICs also require only a single-positive supply rail and exhibit positive gain slope, which removes the need for biasing and matching circuitry, and gain slope equalization circuitry.
Available Frequency Bands
- RF Frequencies
- HF Distributed Amplifiers (3 MHz to 30 MHz)
- VHF Distributed Amplifiers (30 MHz to 300 MHz)
- UHF Distributed Amplifiers (300 MHz to 1 GHz)
- L-band Distributed Amplifiers (1 GHz to 2 GHz)
- S-band Distributed Amplifiers (2 GHz to 4 GHz)
- C-band Distributed Amplifiers (4 GHz to 8 GHz)
- Microwave Frequencies
- X-band Distributed Amplifiers (8 GHz to 12 GHz)
- Ku-band Distributed Amplifiers (12 GHz to 18 GHz)
- Millimeter-wave Frequencies
- K-band Distributed Amplifiers (18 GHz to 27 GHz)
- Ka-band Distributed Amplifiers (27 GHz to 40 GHz)
- Q-band Distributed Amplifiers (33 GHz to 50 GHz *waveguide frequency band)
- V-band Distributed Amplifiers (40 GHz to 75 GHz)
Applications
- Wireless Point-to-point (P2P) Radio
- Wireless Point-to-multipoint (P2M) Radio
- Transmitter-Receiver (TR) Modules for Wireless Communications and Radar
- Military Radar Transmitters and Receivers
- Avionic Radar Transmitters and Receivers
- Electronic Warfare (EW)
- Electronic intelligence (ELINT) and Signal Intelligence (SIGINT)
- High Survivability Receivers (Jamming Resistant Receivers)
- Satellite Communications (SATCOM)
- RF Test and Measurement (T&M) Equipment
Common Uses
- Distributed RF Amplifiers for Ultra-wideband Millimeter-wave Phased Array Antennas (SATCOM, Radar, 5G Communications)
- Space
Key Features
- High Dynamic Range
- Wideband (or Broadband) Options
- Positive Bias Supply Options (single-positive supply voltage)
- Positive Gain Slope
- Low Current Consumption
- 50 Ohm Matched Designs
- Small Die Size
Packaging Options
- Die
- Pb-free RoHS Compliant SMT Packages
- 3x3 mm ceramic QFN
- 4x4 mm ceramic QFN
- MSL Rating: MSL1
- ESD Rating: Class 1A
- Full-passivation available
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Distributed Amplifier MMICs | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Tech Brief Describes the Benefits of Designing EW Systems with Positive Gain Slope MMIC Amplifiers
Custom MMIC
300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294
©2006-2017 Custom MMIC
All rights reserved.
Get our News:
 |
|
 |
 |
 |
|
300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294
Terms and Conditions
Privacy Policy
©2006-2019 Custom MMIC
All rights reserved.