The CMD283 is a broadband MMIC low noise amplifier die ideally suited for EW and communications systems where small size and low power consumption are needed. The device is optimized for broadband performance and delivers 27 dB of gain with a corresponding noise figure of 0.6 dB at 4 GHz. The CMD283 is a 50 ohm matched design which eliminates the need for external DC blocks and RF port matching. The CMD283 offers full passivation for increased reliability and moisture protection.
Released – for new design
|Frequency (GHz)||2 - 6|
|Noise Figure (dB)||0.6|
|Phase Noise (dBc/Hz)|
|Output P1dB (dBm)||16|
|Output Psat (dBm)||18|
|Bias Voltage Vdd/Vgg (V)||+2 to +5 / +1.5|
|Bias Current (mA)||42|
Provide us a few details and we’ll keep you posted on new releases and you’ll always have easy access to our growing library of design files and tech briefs when you revisit. (Requires cookies to be turned on.)
In addition to offering delivery from stock on our own evaluation boards for nearly all our die and packaged devices, Custom MMIC has also put nearly 30% of our devices into the X-Microwave block system. This drop-in simulation, prototyping, and production system enables efficient and expedient microwave and millimeter-wave circuit development and testing.
Custom MMIC strives to design all of our MMIC devices in a manner such that they can be readily chosen for your space application. We have an extensive history of successfully screening and qualifying our product to space applications per MIL-PRF-38534, MIL-PRF-38535, NASA INST standards and customer specific requirements. We collaborate with our customers to determine the appropriate screening and qualification based on their specific mission. Our space product screening and qualification are performed in-house and with approved partners. Whether you are looking for a space screened die, hermetically sealed packaged product or non-hermetic packaged product, Custom MMIC is prepared to help you address your qualification requirements
Design alternative parts have been engineered and manufactured to replicate the form, fit and function of the original part as closely as possible. Compare datasheets and see for yourself the design flexibility and continued reliability and performance design alternates have to offer.