The CMD247 is a wideband (Ka, Q, U band) GaAs MMIC low phase noise RF / Microwave amplifier (LPNA) ideally suited for military, space and communications systems. At 35 GHz the amplifier MMIC delivers 13 dB of gain, a saturated output power of +15 dBm and a noise figure of 5 dB. Also, the amplifier provides low phase noise of less then -160 dBc/Hz at 10 kHz offset. The CMD247 MMIC is a 50 ohm matched design which eliminates the need for external DC blocks and RF port matching. The CMD247 also offers full passivation for increased reliability and moisture protection.
Released – for new design
|Frequency (GHz)||30 - 40|
|Noise Figure (dB)||5|
|Phase Noise (dBc/Hz)||-160|
|Output P1dB (dBm)||13.5|
|Output Psat (dBm)||15|
|Bias Voltage Vdd/Vgg (V)||+2 to +4 / +2 to +3|
|Bias Current (mA)||28|
Provide us a few details and we’ll keep you posted on new releases and you’ll always have easy access to our growing library of design files and tech briefs when you revisit. (Requires cookies to be turned on.)
In addition to offering delivery from stock on our own evaluation boards for nearly all our die and packaged devices, Custom MMIC has also put nearly 30% of our devices into the X-Microwave block system. This drop-in simulation, prototyping, and production system enables efficient and expedient microwave and millimeter-wave circuit development and testing.
Custom MMIC strives to design all our MMIC devices in a manner such that they can be readily chosen for your space applications. We offer turnkey space screening / testing service when a device is categorized as "Ready for Space Screening" on our website. In some cases, our devices have already been "Space Qualified" or "Mission Specific" and are often available from stock. Our "Mission Specific" devices are screened based on custom applications where screening is derived from MIL requirements and tailored specific to customer needs. Just let us know when requesting price and delivery, or technical support, if your devices will be used in space.