search Custom MMIC
Custom MMIC

News

New Ultra Low Noise GaAs Amplifiers Operate from 10 to 17 GHz

Posted on Thursday, January 16, 2014
New Ultra Low Noise GaAs Amplifiers Operate from 10 to 17 GHz

New Ultra Low Noise GaAs Amplifiers Operate from 10 to 17 GHz – Custom MMIC is adding two new low noise amplifiers, the CMD167 and the CMD167P3, to their growing product line. Both are ideally suited for EW and communications systems where small die size and low power consumption are needed.

The CMD167 is a highly efficient, ultra low noise GaAs MMIC amplifier that operates from 10 to 17 GHz. The CMD167P3 is the packaged version of the amplifier which operates from 8 to 16 GHz. At 14 GHz, both the CMD167 and the CMD167P3 deliver greater than 15 dB of gain, with an output 1 dB compression point of +11 dBm and a noise figure of 1.8 dB. Both are 50 ohm matched designs, thereby eliminating the need for external DC blocks and RF port matching.

The CMD167 and CMD167P3 each require a single positive supply voltage for operation. The CMD167 is available as a bare die for hybrid assemblies, whereas the CMD167P3 is housed in a leadless 3x3 mm plastic surface mount package.

To download the full datasheet on the CMD167, visit the Custom MMIC Product Library at http://custommmic.com/datasheets/CMD167_ver_1.1_0713.pdf. For the CMD167P3, visit http://custommmic.com/datasheets/CMD167P3_ver_1.0_0713.pdf.

Custom MMIC

300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294

Terms and Conditions

©2006-2017 Custom MMIC
All rights reserved.

Get our Updates:

Stay informed of new products:

Custom MMIC

300 Apollo Drive
Chelmsford, MA 01824
Phone: 978-467-4290
Fax: 978-467-4294

Terms and Conditions

©2006-2017 Custom MMIC
All rights reserved.